Free 2024 CCNP Enterprise 300-430 dumps are available on Google Drive shared by DumpsMaterials
Welcome to download the newest DumpsMaterials 300-430 PDF dumps: https://braindumps2go.dumpsmaterials.com/300-430-real-torrent.html ( 218 Q&As)
The Cisco 300-430 exam format consists of 60-70 multiple-choice and simulation questions that must be completed within 90 minutes. To successfully pass the exam, candidates must achieve a score of at least 750 out of a possible 1000. 300-430 exam can be taken at any authorized testing center globally, and candidates must register and pay the exam fee to be able to sit for the exam. Overall, the Cisco 300-430 certification exam is an important step for IT professionals looking to advance their careers and demonstrate their expertise in wireless networking.
Cisco 300-430 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Multicast | 10% | - Implement multicast components - Describe how multicast can affect wireless networks - Implement multicast on a WLAN - Implement mDNS - Implement Multicast Direct |
| Device Hardening | 10% | - Implement device access controls (including RADIUS and TACACS+) - Implement access point authentication (including 802.1X) - Implement CPU ACLs on the controller |
| QoS on a Wireless Network | 10% | - Implement QoS schemes based on requirements including wired to wireless mapping - Implement QoS for wireless clients - Implement AVC including Fastlane (only on WLC) |
| FlexConnect | 15% | - Deploy FlexConnect components such as switching and operating modes - Deploy FlexConnect capabilities
- Implement Office Extend |
| Location Services | 10% | - Deploy MSE and CMX on a wireless network - Implement location services
|
NEW QUESTION # 100
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. remote LAN
- B. remote LAN ACL
- C. client load balancing
- D. AAA override
Answer: A
Explanation:
NEW QUESTION # 101
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. analytics
- B. presence
- C. connect and engage
- D. detect and locate.
Answer: D
Explanation:
NEW QUESTION # 102
A wireless administrator receives this information to complete a CMX deployment in high availability by using version 10.6 to gather analytics.
IP address of the primary server
IP address of the secondary server
failover mode to be configured as automatic
root password of the secondary server
email ID for NOC notifications
Enabling high availability fails when these parameters are used. Which action resolves the issue?
- A. Enable the virtual IP address of the primary server.
- B. Place primary and secondary servers in different subnets.
- C. Use IP protocol 4242 for the controller to reach the CMX server.
- D. Insert the cmxadmin password of the secondary server.
Answer: D
NEW QUESTION # 103
An engineer must implement a BYOD policy with these requirements:
Onboarding unknown machines
Easily scalable
Low overhead on the wireless network
Which method satisfies these requirements?
- A. dual SSID
- B. open SSID
- C. triple SSID
- D. single SSID
Answer: D
NEW QUESTION # 104
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted. Which cause of this issue is true?
- A. Fallback is disabled
- B. DNS query is enabled
- C. DNS query is disabled
- D. Fallback is enabled
Answer: A
Explanation:
NEW QUESTION # 105
Refer to the exhibit.
An engineer implemented the CPU ACL on your Cisco 5520 Series Wireless LAN Controller, and the controller is no longer manageable via the network. What must be changes on this CPU ACL to enable it to manage the controller again?
- A. Permit statements must be added to the top of the ACL in both directions, which specify the network to be managed from and the virtual interface of the controller.
- B. Permit statements must be added to the top of the ACL, which specify the network to be managed from.
- C. Line 1 must be set to a destination port of HTTP.
- D. Line 1 must be set to the inbound direction.
Answer: A
NEW QUESTION # 106
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue'
- A. Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.
- B. Disable Cisco Hyperlocation. change the Cisco Hyperlocation detection threshold and then enable it
- C. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WL AN.
- D. Place the APs to monitor mode shutdown the radios, and then change Cisco Hyperlocation detection threshold
Answer: B
NEW QUESTION # 107
Which statement about the VideoStream/Multicast Direct feature is true?
- A. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.
- B. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
- C. It converts the unicast frame to a multicast frame over the air.
- D. Each VideoStream client acknowledges receiving a video IP multicast stream.
Answer: D
Explanation:
NEW QUESTION # 108
An engineer must implement a BYDD policy with these requirements:
* Onboarding unknown machines
* Easily scalable
* Low overhead on the wireless network Which method satisfies these requirements?
- A. dual SSID
- B. open SSID
- C. triple SSID
- D. single SSID
Answer: D
NEW QUESTION # 109
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode uses distribution trees. Dense mode floods.
- B. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- C. Sparse mode floods. Dense mode uses distribution trees.
- D. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te
NEW QUESTION # 110
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan add 30
- B. config flexconnect BranchA-FCG vlan 30 add
- C. config flexconnect group BranchA-FCG vlan add 30
- D. config flexconnect group BranchA-FCG vlan 30 add
Answer: C
Explanation:
NEW QUESTION # 111
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
- A. WLC IP address
- B. AP name
- C. client MAC address
- D. client description
- E. X, Y real location
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_guide.html
NEW QUESTION # 112
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Disable DHCP proxy on the Cisco WLC.
- B. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
- C. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- D. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html
NEW QUESTION # 113
Refer to the exhibit.
An engineer needs to manage non-802.11 interference. What is observed in the output on PI?
- A. At least one strong interferer is impacting connectivity at this site.
- B. The three individual clusters shown indicate poor AP placement.
- C. Several light interferers are collectively impacting connectivity at this site.
- D. RF at this site is unable to provide adequate wireless performance.
Answer: B
NEW QUESTION # 114
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Allow WMM
- B. Set QoS to Platinum
- C. Trust DSCP
- D. Enable CAC
Answer: A
Explanation:
Explanation
Text Description automatically generated with medium confidence
NEW QUESTION # 115
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. keyloggers
- B. unauthorized users
- C. malware
- D. network analyzers
- E. lost and stolen devices
Answer: C,E
NEW QUESTION # 116
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the global and is opening a new branch in a different location. The engineers' task is to execute all the wireless configuration and to suggest how to configure the switch ports for new Aps. Which configuration must the switching team use on the switch ports?
- A. Trunk mode
- B. Access mode
- C. Multiple VLAN
- D. Single mode
Answer: B
NEW QUESTION # 117
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?
- A. Enable IGMP snooping on the WLC
- B. Enable IGMPv3 on the central Layer 3 switch.
- C. Create multicast groups on the central Layer 3 switch.
- D. Enable multicast mode on the WLC
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.html
NEW QUESTION # 118
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?
- A. Multicast Source Discovery Protocol
- B. Source Specific Multicast
- C. Protocol Independent Multicast Sparse Mode
- D. Protocol Independent Multicast Dense Mode
Answer: B
Explanation:
NEW QUESTION # 119
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?
- A. Platinum QoS configured on the WLAN
- B. mls qos trust dscp configured on the controller switch port
- C. WMM set to required on the WLAN
- D. mls qos trust cos configured on the controller switch port
Answer: B
Explanation:
NEW QUESTION # 120
An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?
- A. Set history parameters in Cisco MSE.
- B. Enable Context Aware and CMX Browser Engage.
- C. Install Cisco Prime Infrastructure with floor maps.
- D. Enable tracking parameters in Cisco MSE.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6/cmx_config/b_cg_cmx106/getting_started_with_c
NEW QUESTION # 121
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. FlexConnect
- B. AP failover priority
- C. SE-connect
- D. split tunneling
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/wireless/aironet-602-officeextend-access- point/117540-configure-splittunneloeap-00.html
NEW QUESTION # 122
An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtend has been implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers. Which solution must be used to address this issue?
- A. OEAP split tunnel
- B. OEAP gateway override
- C. WLAN static IP tunneling
- D. FlexConnect local switching
Answer: A
NEW QUESTION # 123
......
Tested Material Used To 300-430: https://braindumps2go.dumpsmaterials.com/300-430-real-torrent.html
