Get Started JN0-103 Exam [2022] Dumps Juniper PDF Questions [Q38-Q61] | DumpsMaterials

Get Started JN0-103 Exam [2022] Dumps Juniper PDF Questions [Q38-Q61]

Share

Get Started: JN0-103 Exam [2021] Dumps Juniper PDF Questions

JN0-103 Premium Exam Engine pdf Download

NEW QUESTION 38
Which three statements describe the Transmission Control Protocol (TCP)?
(Choose three.)

  • A. TCP is faster than the User Datagram Protocol (UDP).
  • B. TCP application examples include HTTP and SMTP.
  • C. TCP uses a best-effort delivery approach.
  • D. TCP provides delivery notification and error-checking mechanisms.
  • E. TCP is a transport layer protocol.

Answer: B,D,E

 

NEW QUESTION 39
How does the PFE determine how to forward transit traffic?

  • A. The PFE uses the forwarding table provided by the RE.
  • B. The PFE uses the routing table provided by the RE.
  • C. The PFE performs a destination lookup based on its own routing table.
  • D. The PFE determines network destinations itself based on the RE's routing table.

Answer: A

 

NEW QUESTION 40
Which statement is true about the longerroute-filter match type?

  • A. All routes within the specified prefix that are longer than or equal to the given prefix are considered a match.
  • B. All routes within the specified prefix that are longer than the given prefix are considered a match.
  • C. All routes within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match.
  • D. All routes within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match.

Answer: B

 

NEW QUESTION 41

Referring to the exhibit, which action would synchronize the local router's clock with the NTP server?

  • A. Configure the NTP server using the set boot-server 172.25.11.254configuration command under the [edit system ntp]hierarchy.
  • B. Configure the correct NTP trusted key using the set trusted-key <key-value>configuration command under the [edit system ntp]hierarchy.
  • C. Reboot the router.
  • D. Issue the set date ntpoperational command.

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 42
Click the Exhibit Button.
[edit]
user@router# show firewall policer policer1 if-exceeding [
bandwidth-limit 1g; burst-size-limit 100k;
]
then discard;
You are asked to limit traffic on interface xe-0/0/3 to 1G using the policer shown in the exhibit. Which configuration would accomplish this task?

  • A. Option A
  • B. Option B
  • C. Option D
  • D. Option C

Answer: A

 

NEW QUESTION 43
Which two statements describe PFE functions are true?

  • A. The PFE stores a local copy of the layer 2 and layer 3 forwarding tables
  • B. The PFE stores the master copy of the layer 2 and layer 3 forwarding tables
  • C. The PFE provides access to the CLI and Jweb
  • D. The PFE implements rate limiting using policers

Answer: A,D

 

NEW QUESTION 44
A Junos device is in a factory-default configuration and no host name is set.
What is used in place of a host name in this scenario?

  • A. Junos
  • B. user
  • C. router
  • D. amnesiac

Answer: D

 

NEW QUESTION 45
Which two methods keep a Junos device operational if the primary storage device fails? (Choose two.)

  • A. Create a rescue configuration.
  • B. Create a recovery snapshot.
  • C. Enable J-Web for device management.
  • D. Enable the ephemeral database.

Answer: B,C

 

NEW QUESTION 46
Exhibit:

Which type of route does the configuration create?

  • A. a default gateway
  • B. a non-advertised route
  • C. a generated route
  • D. an indirect next hop

Answer: A

 

NEW QUESTION 47
What statement is true about the orlonger route-filter match type?

  • A. All routes within the specified prefix that are longer or equal to the given prefix are considered a match
  • B. All routes within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match
  • C. All routes within the specified prefix that are longer than the given prefix are considered a match
  • D. All routes within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match

Answer: C

 

NEW QUESTION 48

Which command produced the output shown in the exhibit?

  • A. Show interfaces terse
  • B. Show interfaces filters
  • C. Show interfaces extensive
  • D. Show interfaces summary

Answer: A

 

NEW QUESTION 49
Which two statements are true regarding dynamic routing? (Choose two)

  • A. Participating devices dynamically learn routing information from each other
  • B. Dynamic routing allows a device to automatically reroute traffic around a failure
  • C. Dynamic routing is used when absolute control of routing parameters is necessary
  • D. Dynamic routing requires more administrative overhead than static routing

Answer: A,B

 

NEW QUESTION 50

Which statement is true about the command shown in the exhibit?

  • A. Only topshould be used, no other options are allowed on the same line.
  • B. If you replace topwith upcommand, it becomes valid.
  • C. There needs to be a ;after topfor the command to be accepted as a valid command.
  • D. The command shown in the exhibit would be accepted as a valid command.

Answer: D

 

NEW QUESTION 51
Which two methods keep a Junos device operational if the primary storage device fails? (Choose two.)

  • A. Enable J-Web for device management.
  • B. Create a recovery snapshot.
  • C. Enable the ephemeral database.
  • D. Create a rescue configuration.

Answer: B,D

 

NEW QUESTION 52
Referring to the exhibit,

Which next-hop interface will be used to reach the 10.21.14.16 destination?

  • A. ge-0/0/2.0
  • B. ge-0/0/0.0
  • C. ge-0/0/3.0
  • D. ge-0/0/1.0

Answer: D

 

NEW QUESTION 53
When a system process encounters an error, how does the Junos OS protect other processes from being impacted?

  • A. Each routing protocol runs as an individual process.
  • B. The Junos OS executes only one process at a time.
  • C. Each process operates in its own shared memory space.
  • D. The Junos OS executes multiple processes simultaneously.

Answer: D

 

NEW QUESTION 54
Referring to the Exhibit,
***Exhibit is Missing***
Which command produced the output shown in the exhibit?

  • A. Show interfaces terse
  • B. Show interfaces filters
  • C. Show interfaces extensive
  • D. Show interfaces summary

Answer: A

 

NEW QUESTION 55
Click the Exhibit button.

You configured the route filter shown in the exhibit.
In this scenario, which IP addresses would term-One accept?

  • A. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the 172.35.0.0/16 and 172.36.0.0/16 subnets.
  • B. IP addresses that are part of the 172.35.0.0/16 network only.
  • C. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the subnets of 172.35.0.0/16 network.
  • D. IP addresses that are part of the 172.35.0.0/16 network, but not IP addresses that are part of the
    172.35.0.0/16 network itself.

Answer: B

 

NEW QUESTION 56
Depending on the device type, Junos is built upon which two OS kernels? (Choose two.)

  • A. FreeBSD
  • B. NetBSD
  • C. Linux
  • D. OpenBSD

Answer: A,C

Explanation:
Explanation/Reference:

 

NEW QUESTION 57
Exhibit:

Refer to exhibit, What will be the result?

  • A. The device will boot in a Single-user mode at the shell prompt
  • B. The device will boot in a multi-user mode at the shell prompt
  • C. The device will boot in a Single-user mode at the operational prompt
  • D. The device will boot in a multi-user mode at the configuration prompt

Answer: D

 

NEW QUESTION 58
Which statement is true?

  • A. Traps are allowed from 10.21.15.180
  • B. Traps are sent to 10.21.15.180
  • C. Traps are sent to 10.21.15.16
  • D. Traps are allowed from 10.21.15.16

Answer: A

 

NEW QUESTION 59
Click the Exhibit button.

A user attempts to log in to a Junos device. but the RADIUS server is unreachable.
Referring to the exhibit, what is the default action of a Junos device in this scenario?

  • A. The Junos device uses the local authentication database.
  • B. The Junos device prompts for a cached RADIUS password.
  • C. The Junos device retries every 30 seconds until the connection is restored.
  • D. The Junos device displays a RADIUS connection error.

Answer: A

 

NEW QUESTION 60
***Exhibit is Missing***
What does the number inside the square bracket represent?

  • A. Route preference
  • B. Local preference
  • C. Protocol reference number
  • D. Metric

Answer: A

 

NEW QUESTION 61
......

Pass Your Juniper Exam with JN0-103 Exam Dumps: https://braindumps2go.dumpsmaterials.com/JN0-103-real-torrent.html