Most UptoDate Citrix 1Y0-231 Exam Dumps PDF 2023 [Q39-Q57] | DumpsMaterials

Most UptoDate Citrix 1Y0-231 Exam Dumps PDF 2023 [Q39-Q57]

Share

Most UptoDate Citrix 1Y0-231 Exam Dumps PDF 2023

100% Free CCA-N 1Y0-231 Dumps PDF Demo Cert Guide Cover


Primary Audiences

The targeted audiences for this evaluation are the specialists who have worked in the areas of Citrix ADC 13 and Citrix Gateway. Then, employees working in the job profiles of System Engineers, Citrix Administrators, Network Engineers & Administrators, and System Administrators are also for this certification.

 

NEW QUESTION 39
What can a Citrix Administrator configure to filter IPv4 addresses?

  • A. Citrix Web App Firewall
  • B. Data set
  • C. URL set
  • D. Pattern set

Answer: A

 

NEW QUESTION 40
A Citrix Administrator wants to customize the look of the landing page presented to users during the authentication process on Citrix ADC.
Which nFactor component should the administrator modify in this scenario?

  • A. Next factor
  • B. Pass-through factor
  • C. Logon Schema
  • D. NoAuth Policy

Answer: C

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/aaa-tm/authentication-methods/multi-factor- nfactor-authentication/nfactor-authentication-configuring.html

 

NEW QUESTION 41
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?

  • A. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
  • B. The Independent Network Configuration (INC) mode is enabled on the primary node.
  • C. HA heartbeats are only seen on some enabled interfaces of the secondary node.
  • D. HA monitoring is enabled on a disabled interface of the primary node.

Answer: A

 

NEW QUESTION 42
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

  • A. Least bandwidth
  • B. Least packets
  • C. Least response time
  • D. Least connection

Answer: A

 

NEW QUESTION 43
Which license type must be installed to configure Endpoint Analysis scans?

  • A. Citrix Web App Firewall
  • B. Platform
  • C. Burst pack
  • D. Universal

Answer: D

 

NEW QUESTION 44
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?

  • A. High availability nodes
  • B. SSL certificate
  • C. VLAN
  • D. Load-balancing virtual servers

Answer: D

Explanation:
Explanation/Reference: https://www.reddit.com/r/Citrix/comments/bamiez/ns_study_question_help/

 

NEW QUESTION 45
Which three Citrix Gateway elements can be configured by the Citrix Gateway Wizard? (Choose three.)

  • A. The bind SSL server certificate for the Citrix Gateway virtual server
  • B. The responder policy for HTTP to HTTPS redirect
  • C. The Citrix Gateway primary virtual server
  • D. The rewrite policy for HTTP to HTTPS redirect
  • E. The primary and optional secondary authentications

Answer: A,C,E

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-gateway/12-1/citrix-gateway-12.1.pdf (333)

 

NEW QUESTION 46
After being audited, a Citrix Administrator learns that additional security enhancements should be made to one of the virtual servers.
Which two actions can the administrator perform to accomplish this? (Choose two.)

  • A. Create a SHA1 key.
  • B. Enable the RC4 cipher suite.
  • C. Enable the TLSv1.2.
  • D. Disable the SSLv3.

Answer: A,C

Explanation:
Explanation/Reference:

 

NEW QUESTION 47
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

  • A. A command policy to the group
  • B. Users to the group on the Citrix ADC
  • C. An authentication, authorization, and auditing (AAA) action to the group
  • D. A nested group to the new group

Answer: A

 

NEW QUESTION 48
A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions.
Which advanced policy will accomplish this?

  • A. REQ.HTTP.HEADER User-Agent CONTAINS Chrome/78.0.3904.108 Safari/537.36
  • B. HTTP.REQ.HEADER("User-Agent").CONTAINS("Mozilla")
  • C. HTTP.REQ.HEADER("User-Agent").CONTAINS("CitrixReceiver")
  • D. REQ.HTTP.HEADER User-Agent NOTCONTAINS CitrixReceiver

Answer: D

 

NEW QUESTION 49
Scenario: A Citrix Administrator needs to configure an authentication workflow on Citrix ADC with the below requirements.
All internal users must use their corporate credentials to authenticate.
Users from partner organizations must be authenticated using their own directory services without replication or a synchronization process.
How can the administrator meet the above requirements while authenticating the users?

  • A. Configure two dedicated AAA virtual servers for internal and partner users.
  • B. Configure nFactor authentication with two LDAP advanced policies and one SAML advanced policy.
  • C. Create two LDAP and two SAML authentication policies on the authentication, authorization, and auditing (AAA) virtual server.
  • D. Deploy SAML on Citrix ADC in the service provider (SP) role for users from partner organizations.

Answer: B

 

NEW QUESTION 50
Users accessing a published application through a Citrix Gateway virtual server require SSO to a StoreFront server using an external, secure, single URL.
Which type of virtual server can the administrator use to meet this requirement?

  • A. VPN
  • B. Load Balancing
  • C. Priority Load Balancing
  • D. Unified Gateway

Answer: B

 

NEW QUESTION 51
What are three possible policy results in a default (advanced) policy configuration? (Choose three.)

  • A. Undefined
  • B. Bridge
  • C. Drop
  • D. True
  • E. False

Answer: A,D,E

 

NEW QUESTION 52
Which authentication type can a Citrix Administrator use to enable Citrix ADC authentication, authorization, and auditing (AAA) dual-factor authentication from a user's mobile device app?

  • A. LOCAL
  • B. SAML
  • C. LDAP
  • D. RADIUS

Answer: C

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/authentication-and-authorization-for- system-user/two-factor-authentication-for-system-users-and-external-users.html

 

NEW QUESTION 53
Which set of items can a Citrix Administrator change when configuring a portal theme for users?

  • A. Logo, background, browser requirements
  • B. Font color, labels, URL displayed
  • C. Browser requirements, logo, labels
  • D. Logo, background, labels

Answer: D

 

NEW QUESTION 54
The Citrix ADC SDX architecture allows instances to share _____________ and _____________. (Choose the two correct options to complete the sentence.)

  • A. the kernel
  • B. physical interfaces
  • C. memory
  • D. CPU

Answer: B,D

 

NEW QUESTION 55
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?

  • A. TCP
  • B. SSL
  • C. DTLS
  • D. HTTP

Answer: B

Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles/secure-front-end-profile.html

 

NEW QUESTION 56
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

  • A. Least bandwidth
  • B. Least packets
  • C. Least response time
  • D. Least connection

Answer: A

Explanation:
Explanation/Reference: https://kb.wisc.edu/ns/page.php?id=13201#Least%20Bandwidth%20Method

 

NEW QUESTION 57
......

Updated Citrix 1Y0-231 Dumps – PDF & Online Engine: https://braindumps2go.dumpsmaterials.com/1Y0-231-real-torrent.html