Prepare for the Actual Nutanix Certified Professional (NCP) NCP-MCI-5.15 Exam Practice Materials Collection
Nutanix Certified Professional (NCP) Certified Official Practice Test NCP-MCI-5.15 - Jul-2022
NEW QUESTION 68
An administrator is migrating workloads to a nutanix cluster. While the Nutanix cluster is ingesting data from the migration, the utilization of the SSDs increases, periodically drops to approximately 75% utilization, then continues to increase.
Which Distributed Storage Fabric (DSF) concept is causing the behavior?
- A. Redundancy Factor 2 (RF2)
- B. Virtual Machine Snapshotting and cloning
- C. Information Lifecycle Management (ILM)
- D. Data Path Resiliency
Answer: D
NEW QUESTION 69
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)
- A. Reclaim the licenses to the Nutanix Support Portal.
- B. Make sure Auto Evacuation is enabled
- C. Verify the data resiliency status of the cluster.
- D. Shut down or live migrate all VMs off of the node.
Answer: C,D
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=AHV-Admin-Guide-v51:AHV-Admin-Guide-v51
NEW QUESTION 70
An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?
- A. Live migration is prevented until the administrator manually changes the newer processor level.
- B. Live migration of VMs is prevented between newer and older processors.
- C. Live migration continues to function as expected and VMs can move to any AHV host.
- D. Live migration is prevented until the administrator enables the legacy migration option.
Answer: B
NEW QUESTION 71
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Change the bond mode to balance-slb or balance-tcp.
- B. Connect the 10Gb interfaces to the physical switch.
- C. Add a new switch to the network and connect 1Gb interfaces to it.
- D. Remove any 1Gb interfaces still connected from the default bond.
- E. Change the VLAN ID to a higher priority ID.
Answer: A,B,E
NEW QUESTION 72
Which two targets are valid options when selecting a remote site to Prism? (Choose Two)
- A. Tape Library
- B. Cloud
- C. Physical Cluster
- D. Network attached storage
- E. XI Cloud Services
Answer: B,C
NEW QUESTION 73
what is the result of a cvm becoming unavailable?
- A. a route is dded to the CVM's touting table
- B. a route is added to the host's routing table
- C. VMs running on the node's host are migrated
- D. the guest VMs on the same node are stunted
Answer: B
NEW QUESTION 74
An administrator has a 5-node cluster configured for RF2 with 200 TB of raw disk space. The administrator decides to enable Erasure Coding to gain additional usable space.
Approximately how much usable space would be available after enabling Erasure Coding?
- A. 175 TB
- B. 150 TB
- C. 100 TB
- D. 125 TB
Answer: B
NEW QUESTION 75
What requires iSCSI initiator configuration in the guest OS to use Volumes?
- A. SQL Server Always On Availability Group
- B. Exchange DAG
- C. Microsoft Windows Failover Cluster
- D. Oracle RAC
Answer: C
NEW QUESTION 76
Which feature must be enabled in order to ensure that VMs are restarted on other hosts in the event of a host failure?
- A. VM Snapshots
- B. Network Segmentation
- C. High Availability
- D. Live Migration
Answer: C
NEW QUESTION 77
Which two items are required to manually upload an AOS update to a Nutanix Cluster? (Choose two)
- A. AFS Binary file
- B. YML file
- C. AOS Binary
- D. AOS zip file
- E. JSON file
Answer: C,E
NEW QUESTION 78
An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* FOU vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Add 4GB of memory to the VM
- B. Increase the vCPUs assigned to the VM
- C. Increase the number of cores per vCPU
- D. Span the 2TB disk across four vDisks
Answer: C
NEW QUESTION 79
What is the expected operation during node addition when the new node has a different AOS version?
- A. The node is automatically re-imaged using the software currently running in the cluster.
- B. The addition fails and forces the administrator to image using standalone Foundation.
- C. The entire cluster is upgraded to the latest one-click release.
- D. The node is added and a separate upgrade operation must be performed.
Answer: B
NEW QUESTION 80
For security reason an administrator needs to logically separate management and data traffic on Nutanix cluster.
Which feature should the administrator select for this configuration?
- A. Network Segmentation
- B. Microsegmentation
- C. Prism Central
- D. Network Virtualization
Answer: A
NEW QUESTION 81
Which three statements are true about Agent VMs? (Choose three.)
- A. An Agent VM is automatically migrated to another host
- B. Agent VMs are powered off if an HA event occurs
- C. A running Agent VM can be moved to another host
- D. Agent VMs are never migrated to another host
- E. Agent VMs are powered on before other VMs
Answer: B,C,E
NEW QUESTION 82
How should an administrator enable secure access to Volumes using a password?
- A. LDAP
- B. CHAP
- C. SAML
- D. iSER
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services-enabling-t.html Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.
NEW QUESTION 83
Which three settings are required for network switch discovery in Prism? (Choose Three)
- A. Cluster CVM IP address
- B. SNMP Community Name
- C. AHV Host IP address
- D. SMTP Server IP address
- E. Switch Management IP Address
Answer: B,C,E
NEW QUESTION 84
what command is used to run the nutanix cluster checks from the CVM CLI?
- A. ncc health_check run_all
- B. ncc check_all health_options
- C. ncc run_all_health_check
- D. ncc check_health run_all
Answer: A
NEW QUESTION 85
An administrator wants to make sure that the health of a cluster is in a good state.
Which command the utility will provide information related to the health of the cluster?
- A. generic status
- B. top
- C. ncc
- D. iostat
Answer: C
NEW QUESTION 86
What is default behavior for VM High Availability for Nutanix AHV?
- A. VMs restart on other hosts as available resource allow
- B. Only VMs with High Availability explicitly enabled will restart
- C. All VMs restart because system reservation are already made
- D. No VMs restart because HA is not enabled by default
Answer: A
NEW QUESTION 87
What command places a host in maintenance mode in AHV?
- A. acli host.enter_maintenance_mode host_id
- B. acli maintenance_mode.host host_id
- C. ncli host maintenance host_id
- D. ncli maintenance_mode host=host_id
Answer: A
NEW QUESTION 88
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. The VMs need to have static IP addresses.
- B. Change the spanning-tree port type on the switch.
- C. Change the network the VMs are connected to
- D. Update the switch to specifically allow VLAN 15
Answer: D
NEW QUESTION 89
An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster.
Which configure should the administrator use to disable password authentication over SSH?
- A. Configure a proxy server in Prism
- B. Enable Cluster Lockdown in Prism
- C. Modify the SSH Configuration on each CVM
- D. Modify the SSH configuration on each host
Answer: B
NEW QUESTION 90
......
Ace Nutanix NCP-MCI-5.15 Certification with Actual Questions Jul 27, 2022 Updated: https://braindumps2go.dumpsmaterials.com/NCP-MCI-5.15-real-torrent.html
