Pass Your Cisco and NetApp FlexPod NS0-176 Exam Easily with Accurate PDF Questions [Apr 25, 2023]
NS0-176 Certification Exam Dumps Questions in here
NEW QUESTION 49
You want to verify that you have configured Multipath HA correctly for all of the attached disk shelves on a NetApp cluster.
Which two commands would you execute from the cluster CLI prompt to accomplish this task? (Choose two.)
- A. node run -node * -command disk show
- B. node run -node * storage show disk -p
- C. node run -node * sysconfig -a
- D. sysconfig -a
Answer: B,D
NEW QUESTION 50
An administrator has a FlexPod solution and is using OnCommand Unified Manager and OnCommand Performance Manager to monitor the FlexPod environment. Full integration has previously been configured between the two OnCommand virtual appliances; however, new performance issues are not being seen in the OnCommand Unified Manager dashboard.
In this scenario, which two settings should the administrator verify? (Choose two.)
- A. Ensure that OnCommand Performance Manager is licensed for use with OnCommand Unified Manager.
- B. Ensure that the NetApp cluster is configured to forward SNMP data to OnCommand Performance Manager.
- C. Ensure that the Event Publisher user credentials are entered correctly on the OnCommand Performance Manager appliance.
- D. Ensure that network connectivity exists between the two virtual appliances.
Answer: A,C
NEW QUESTION 51
An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster.
Which pool is needed to configure the vHBA templates?
- A. WWPN pool
- B. WWNN pool
- C. MAC pool
- D. IQN pool
Answer: A
NEW QUESTION 52
Which type of pools do you need to create vHBA templates?
- A. MAC
- B. WWNN
- C. WWPN
- D. IQN
Answer: C
NEW QUESTION 53
How many ACTIVE SPAN sessions exist on a Fabric Interconnect?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: A
NEW QUESTION 54
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
- B. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- C. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- D. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
Answer: C
NEW QUESTION 55
When installing an instance of VMware ESXi on a UCS B-Series server, where should an ISO image be loaded?
- A. ISO images should not be used
- B. From the UCS Manager select KVM Console, Select the Virtual Media tab, and select Add Image
- C. Only physical install disks are supported on UCS B-Series servers
- D. The UCS vCenter Plugin must be used
Answer: B
NEW QUESTION 56
NetApp recommends that your SSL key length be?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 57
Which statement is true for Fibre Channel QoS System Class?
- A. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
- B. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
- C. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
- D. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
Answer: A
NEW QUESTION 58
After deploying a FlexPod solution, which tool would you use to validate a successful installation?
- A. Hardware Universe
- B. Config Advisor
- C. UCS Manager
- D. System Manager
Answer: B
NEW QUESTION 59
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Thick Provision Eager Zeroed
- B. Thick Provision Lazy Zeroed
- C. Full Provision
- D. Thin Provision
Answer: A
NEW QUESTION 60
Which of the following tools is designed to inventory existing VMware vSphere, Linux, and Microsoft Windows Server versions in a customer environment?
- A. Cisco UCS Sizer for Enterprise Applications
- B. Microsoft Assessment and Planning (MAP) Toolkit
- C. Cisco Resource Comparison Tool
- D. Cisco UCS Central
Answer: B
NEW QUESTION 61
Your primary VSM needs to be edited, rebooted, or migrated. You need to initiate a manual switchover to your standby VSM.
What command will allow this to occur?
- A. vsm switchover
- B. Standby activate
- C. System switchover
- D. System standby
Answer: C
NEW QUESTION 62
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
- A. UCS Director
- B. OnCommand Insight
- C. UCS Manager
- D. OnCommand System Manager
Answer: A
NEW QUESTION 63
When trying to configure a Virtual Port Channel (vPC), what might be a cause of the following error when trying to create the vPC domain?
Nexus-5548-B(config)# vpc domain 10
^% Invalid command at '^' marker.Nexus-5548-B(config)#
- A. The vPC links have to be configured before the vPC domain can be added
- B. The vPC domain has already been configured
- C. Have not yet turned on the vpc feature using the 'feature vpc' command
- D. vPC domain cannot be configured at the global prompt
Answer: C
NEW QUESTION 64
......
Updated NS0-176 Exam Practice Test Questions: https://braindumps2go.dumpsmaterials.com/NS0-176-real-torrent.html
